- No products in the cart.
Description
Fi-Clor Spa Anti-Scale has been formulated to help prevent the formation of scale on spa surfaces in hard water and facilitate cleaning of vulnerable areas. It is compatible with all types of filter (sand, cartridge) and contains no phosphate.
INSTRUCTIONS
DO NOT MIX WITH OTHER PRODUCTS. DO NOT DISSOLVE BEFORE USE.
1. Fi-Clor Spa Anti-Scale can be dosed directly into the spa but should be used only when bathing has ceased.
2. The dose rate is 50ml of Anti-Scale to 1,000 litres (220 galls) of spa water. Dose into an area of the spa where there is good water movement and keep the circulation running.
3. Bathing may resume after 10 minutes with the circulation on.
4. Repeat the dose every time fresh water is introduced inti the spa.
5. The dose rate can be doubled where the mains top up water is particularly scale forming.
RELATED PRODUCTS
5kg pH Increaser
Swimfresh pH Increaser (Soda Ash) is for raising the pH level in swimming pool water. pH is a measure of how acid or how alkaline the water is. Low pH can...
Pool Check 3 in 1
Pool Check® 3in1 offers the user more than just another test strip; it offers accurate results that you can rely on. Pool Check® 3in1 has been specially designed to work...
5kg Chlorine Tablets 200gm
Ideal Levels Prior to using this product, adjust the pH levels to the ideal range of 7.2-7.6 to promote bather comfort, plant protection and effective chemical use. The tablets are...
5ltr Winterfresh
This effective copper free algaecide will help prevent the multiplication of most types of algae over the winter. It also prevents staining and scale formation. This product is compatible with...
2kg Stabilised Chlorine Granules
Chlorine Granules are ideal for daily dosing of your swimming pool or spa, to produce free active chlorine which kills bacteria and other potentially harmful organisms. They are rapid dissolving...
1Ltr Anti-foam
Fi-Clor Spa Anti-Foam enables you to deal with foaming on the surface of the water which is often caused by a build-up of soaps, shampoos, detergents or skin treatment products....
7kg PH Reducer -
The ideal pool water levels for pH and Total Alkalinity (TA) are 7.2-7.6 for pH and 80-150ppm(mg/l) for Total Alkalinity. Depending on the method of application, the reducer will either...
2kg Chlorine Tablets 200gms
Ideal Levels Prior to using this product, adjust the pH levels to the ideal range of 7.2-7.6 to promote bather comfort, plant protection and effective chemical use. The tablets are...