Fi-Clor Spa Alkalinity Increaser should be used to raise the total alkalinity level in spa water. Alkalinity is a measure of the total amount of alkali in spa water. If the alkalinity is too low, most chemicals added to the spa will directly affect the water balance leading to rapid fluctuations in pH readings. Alkalinity at the correct level will help protect, or "buffer" the pH.
INSTRUCTIONS
DO NOT MIX WITH OTHER PRODUCTS. DO NOT DISSOLVE BEFORE USE.
1. Take an alkalinty reading reading using your test kit or test strips. You will need to raise the total alkalinity if the reading is below 80mg/l (ppm).
2. The dose rate is 30g of Fi-Clor Spa Alkalinity Increaser per 1,000 litres (220 galls) of spa water. Each dose will raise the alkalinity by approx 10 - 20mg/l (ppm).
3. With the circulation running, dose directly in several areas around the spa, avoiding the skimmer. Only dose when bathing has ceased.
4. Re-test after 24 hours. If the total alkalinity is still low, repeat the dose.
5. Maintain alkalinity between 80 - 160mg/l (ppm).
Description
RELATED PRODUCTS
5kg pH Increaser
Swimfresh pH Increaser (Soda Ash) is for raising the pH level in swimming pool water. pH is a measure of how acid or how alkaline the water is. Low pH can...
Pool Check 3 in 1
Pool Check® 3in1 offers the user more than just another test strip; it offers accurate results that you can rely on. Pool Check® 3in1 has been specially designed to work...
1.2kg Non-Chlorine Shock
Fi-Clor Spa Non-Chlorine Shock is an ideal shock treatment for spas operating on bromine or chlorine. It dissolves rapidly to break down unpleasant pollutants in the water that can lead...
5kg Chlorine Tablets 200gm
Ideal Levels Prior to using this product, adjust the pH levels to the ideal range of 7.2-7.6 to promote bather comfort, plant protection and effective chemical use. The tablets are...
Fi-Clor 1kg Superfast Shock
Use the day before a pool party for sparkling clear water. Breaks down pollutants that cause eye sting and odour. This pack contains sufficient Superfast product for 2 Superchlorinations or...
Fi-Clor 5kg pH Increaser
Fi-Clor pH Increaser (Soda Ash) is for raising the pH level in swimming pool water. pH is a measure of how acid or how alkaline the water is. Low pH can...
5ltr Winterfresh
This effective copper free algaecide will help prevent the multiplication of most types of algae over the winter. It also prevents staining and scale formation. This product is compatible with...
7kg PH Reducer -
The ideal pool water levels for pH and Total Alkalinity (TA) are 7.2-7.6 for pH and 80-150ppm(mg/l) for Total Alkalinity. Depending on the method of application, the reducer will either...